Tempered glass Hofi UV Glass Pro+ protects a significant part of the rounded screen, has a surface hardness of 9H, so it is extremely resistant to scratches even when in contact with sharp objects, and is additionally covered with an oleophobic coating that reduces fingerprints.
The UV model is glued with a liquid substance over the entire surface of the screen, and then with the help of a UV lamp the substance is cured.
With this combination, we get the perfect effect of smoothness, clarity and responsiveness.
Installation is easy and pleasant for the user.
Check out how to install: https://www.youtube.com/watch?v=W7uxROE7ywk&feature=youtu.be
* We do not recommend using 3D glass without any case.
** We do not recommend using glass if the case overlaps the edges of the screen too much, there is a risk of undermining.
*** The functionality of the fingerprint reader in the screen may be slightly affected if a film or glass coating is installed. The fingerprint reader is not fully refined for additional coatings.
INSTALLATION INSTRUCTIONS:
1) Begin installation in the bathroom right after taking a bath - the steam will absorb all the dust from the atmosphere and you will not be disturbed by the installation.
2) Clean and degrease the screen surface thoroughly, then use a dry cloth to polish it to a shine.
3) Use the ribbon from the kit to seal the speaker.
4) Connect the UV lamp using the Type-C cable to the power source.
5) Pour the liquid on the very center of the device.
6) Install the glass as evenly as you can, you can also correct this step before the surface cures when the liquid is on the screen along with the glass.
7) If an air bubble has appeared, use an ATM card and gently push it out of the glass, this step is done before curing.
8) Using a UV lamp, cure the glass along the center in five places for 15 seconds each and then around the edges for 10 seconds each.
9) Clean your phone of any residual cured glue.
10) If your device has a fingerprint reader in the screen, be sure to remove and re-add the fingerprint after installing the screen glass.
11) Enjoy a job well done!
PRODUCT FEATURES:
- 100% Original
- Packaged in original packaging
- 0.3mm thick tempered glass
- 9H scratch resistance
- Equipped with oleophobic coating
- Leaves no trace when removed
- Dimensions: 154x70mm
KIT INCLUDES:
1 x Glass Hofi UV Glass Pro+
1 x UV lamp (without Type-C cable)
1 x Tube with adhesive
1 x Installation kit
Termékleírásaink és termékneveink gépi fordítóval készültek.
HOGYAN TUDOM MEGRENDELNI A TERMÉKET?
Honlapunkon regisztráció nélkül is tud vásárolni, valamint bankkártyás fizetésre is van lehetősége.
MobileHome webshopban a következőképpen tudja leadni megrendelését:
1. Válassza ki a megrendelni kívánt terméket,
2. helyezze kosárba a terméket,
3. kattintson a kosár gombra,
4. nézze át a megrendelését, kattintson megrendelés elküldése gombra,
5. töltse ki az adatait
6. válasszon fizetési és szállítási módot, majd fogadja el az ÁSZF-t, a megrendelése fizetési kötelezettséggel jár rubrikát pipálja ki, végül kattintson, a rendel gombra!
7. Vásárlás véglegesítése RENDEL gomb!
