Can flexible mean better?
A small thickness of only 0.28mm and full coverage of the screen makes the hybrid glass Hofi almost invisible.
Hardness of 7H achieved thanks to the ceramic coatings used.
These are the features of a hybrid of glass and film, which means not only high resistance to pressure or scratches, but also full sensitivity to touch and perfect clarity and image saturation.
And finally, the most important, the biggest advantage of the product - it does not crack or shatter, unlike traditional tempered glass!
Check out how to install:
https://www.youtube.com/watch?v=j5WIzyY5AzA
INSTALLATION INSTRUCTIONS:
Installation of this model of glass looks different from traditional ordinary tempered glass on a thin adhesive layer, it is slightly more difficult due to a thicker adhesive layer.
At the initial stage of application, bubbles or air strips may remain trapped under the glass, which need to be brought out with repetitive movements to the edge, but the easiest way in this case is to peel off the coating to the place of the air bubble and stick it again, bringing out the air with, for example, an ATM card.
It is also important to remember that due to the curvature, the curvature of the glass must coincide with the curvature of the screen.
If the glass does not stick on either side, it means that it was glued crookedly, in which case you will have to peel it off and try again to install it until it does.
Due to the polishing and milling of the screen, this requires up to a few minutes of work in some cases, but the correct final result is delightful.
PRODUCT FEATURES:
- 100% Original
- Packaged in original packaging
- Surface hardness 7H
- Thickness 0.28mm
- Retains full touch sensitivity
- Precision fit
- Dimensions: ø38mm
KIT INCLUDES:
2 x Glass Hofi Hybrid Pro+
1 x Installation Kit
Termékleírásaink és termékneveink gépi fordítóval készültek.
HOGYAN TUDOM MEGRENDELNI A TERMÉKET?
Honlapunkon regisztráció nélkül is tud vásárolni, valamint bankkártyás fizetésre is van lehetősége.
MobileHome webshopban a következőképpen tudja leadni megrendelését:
1. Válassza ki a megrendelni kívánt terméket,
2. helyezze kosárba a terméket,
3. kattintson a kosár gombra,
4. nézze át a megrendelését, kattintson megrendelés elküldése gombra,
5. töltse ki az adatait
6. válasszon fizetési és szállítási módot, majd fogadja el az ÁSZF-t, a megrendelése fizetési kötelezettséggel jár rubrikát pipálja ki, végül kattintson, a rendel gombra!
7. Vásárlás véglegesítése RENDEL gomb!